Palm Bay Electrical Company handles electrical work for homeowners, landlords, property managers, and businesses across Palm Bay and Brevard County. From a tripping breaker to a full panel upgrade, from a single outlet to whole-home rewiring, we cover the full range of residential and commercial electrical repair and installation. We are available every day from 9:00 AM to 9:30 PM, so you are not waiting until Monday to get a real answer.
Call (321) 499-1593 for a quote.
Clear communication from the first call to the final test is how every job runs. You get a straight answer on the phone, a clear scope before anything starts, and a walkthrough when the work is done.
No guesswork. No shortcuts. No loose ends.
Most homeowners can't tell a minor wiring issue from a serious one, and that gap is exactly where problems get worse. Flickering lights, dead outlets, a breaker that keeps tripping, a burning smell near a panel or outlet, a switch that sparks when you flip it - each of these is a signal worth taking seriously.
A diagnostic visit covers the symptom you called about and the circuit feeding it. We check the outlet, the wiring path, the breaker, and the grounding and bonding connections to understand what is actually happening before any work starts. If the problem involves arc-fault or ground-fault protection, we identify whether the AFCI or GFCI device is doing its job or has failed. If it is something deeper in the wiring, we tell you that too.
A burning smell or a sparking outlet is not a wait-and-see situation. Call and describe what you are seeing. We scope the job on the phone and get it on the schedule. Leave the breakers to us.
A panel that was sized for a smaller home or an older electrical load will struggle to keep up with a modern electrical load. Frequent breaker trips, a fuse box still in service, a 100-amp service feeding a home that now runs multiple large appliances, or plans for an EV charger or a standby generator - any of these point toward a panel upgrade conversation.
We handle the full scope: panel replacement, service-entrance upgrades, meter upgrades, and subpanel installation where a detached garage or addition needs its own feed. Every upgrade starts with a load calculation so the new panel is sized correctly for what the home is actually running, not just what it ran ten years ago.
Straight answers about your panel and wiring are part of every call. When you ask what size service you need or whether your current panel can carry an added circuit, you get a real answer, not a vague estimate. The price is confirmed before we schedule anything.
Wiring is easier to deal with when somebody explains it plainly, and that is how we approach every job in this category. Two-prong outlets in an older home are a sign the wiring deserves a look. Ungrounded outlets, missing GFCI protection in kitchens and bathrooms, aluminum wiring that has not been properly remediated - these are not cosmetic issues.
We handle single-outlet replacements, GFCI and AFCI outlet installation, dimmer switches, and the full range of wiring upgrades. For older homes that need more than a spot fix, we also do whole-home rewiring, knob-and-tube replacement, and aluminum-wiring remediation. The work is done to code, and we walk you through what was found and what was changed.
Landlords and property managers call us regularly for this kind of work. A rental property with outdated wiring or missing GFCI protection in wet areas is a liability, and keeping it current is a straightforward job when it is scoped correctly. We show up ready to work.
When the job is done, we leave your home clean and powered, and that holds whether we installed one ceiling fan or rewired a full outdoor lighting circuit. We handle recessed and LED lighting installation, light fixture replacement, under-cabinet lighting, and ceiling fan installation throughout the home.
Outdoor lighting is a year-round consideration in Palm Bay. Security lighting, motion sensor lights, landscape lighting, and exterior fixture replacement all come up regularly here, and we wire them properly with the weatherproofing and GFCI protection the climate demands. A well-lit exterior is not just a comfort feature - it matters for safety and for property value.
For businesses, we handle office and retail lighting upgrades, including LED retrofits that reduce the load on a commercial panel. Pick up the phone and we'll get rolling.
Large appliances need their own dedicated circuits. A dryer, oven, refrigerator, or dishwasher sharing a circuit with other loads is a recipe for tripped breakers and, in some cases, a code violation. We run dedicated circuits sized to the appliance, confirm the panel has capacity, and make sure the connection is clean and correct.
EV charger installation is one of the most common dedicated circuit requests we handle. A Level 2 charger needs a 240-volt circuit and a panel that can carry the added load. We run the circuit, install the outlet or hardwired connection, and check that the panel is sized for it. If an upgrade is needed first, we handle that too.
Hot tub and pool equipment circuits come up often across Palm Bay. We take pride in the electrical work we leave behind on these jobs - proper grounding, correct wire sizing, and outdoor GFCI protection done to code from the start.
Your home deserves wiring that's safe and up to code, and so does every commercial space, rental unit, and office building we work in. We serve residential customers, landlords, property managers, and business owners across Palm Bay and the surrounding area, including Melbourne, Rockledge, Viera, West Melbourne, Malabar, and Grant-Valkaria.
For businesses, we handle outlet and circuit installation, lighting upgrades, panel work for expanded loads, and electrical work for office, retail, and light commercial spaces. Renovation and remodel projects often need a full electrical review before walls close, and we scope that work on the call.
Property managers and landlords call for turnover work, code compliance, and repairs across multiple units. Whether it is one rental or a portfolio of properties in Brevard County, we handle the work the same way: scope it clearly, price it on the call, and get it done.
An electrical inspection gives you a clear picture of what the wiring in a property can handle and where it falls short. Home buyers, sellers, landlords, and owners of older homes all have good reasons to schedule one.
A pre-purchase inspection covers the panel, the wiring type and condition, grounding and bonding, GFCI and AFCI protection, and visible signs of DIY work or code issues. You get a written picture of what is there and what it means for the property. For a home sale, an inspection lets you address issues before they show up in a buyer's report.
Rental property inspections are a separate category. Compliance with current code matters for habitability, and an inspection identifies what needs attention before it becomes a problem.
Call (321) 499-1593 to ask what an inspection covers and to get a quote.
Palm Bay sits in the middle of one of the most storm-active stretches of the Florida coast. Hurricane season runs from June through November, lightning is a year-round presence, and the combination of heat, humidity, and coastal air puts real demands on electrical systems. These three services come up more often here than almost anywhere else in the country.
A power outage during a Florida storm is not an inconvenience - it is a genuine problem for families, businesses, and anyone who depends on medical equipment or refrigerated medication. We handle generator hookup and transfer switch installation for standby generators and portable units. A properly installed transfer switch keeps the generator isolated from the utility line, which protects both the equipment and the people working on the lines outside. If your home does not have the panel capacity to support a generator connection, we address that as part of the same job.
Florida leads the country in lightning strikes, and the Palm Bay area is directly in that pattern. A single strike near the home can send a voltage spike through every circuit. Whole-home surge protection installed at the panel level catches that spike before it reaches your appliances, electronics, and wiring. It is one of the most cost-effective electrical upgrades available here, and it is a straightforward installation. We confirm what level of protection makes sense for your panel and get it in place.
Backyard pools and spas are common across Palm Bay, and the electrical work behind them is not a shortcut situation. Pool and spa wiring requires a dedicated circuit, proper bonding of all metal components in and around the water, and outdoor GFCI protection throughout. Done correctly, it meets code and keeps everyone using the pool safe. We scope pool and hot tub wiring jobs on the call and walk you through what the installation involves before anything is scheduled.
Ready to get the power back on? The first step is a phone call.
When you call (321) 499-1593, you get a real conversation about what the job involves, what it is likely to cost, and what happens next.
The price is confirmed before anything is scheduled. If you have questions about what the quote covers, ask and you get a straight answer.
We are available every day from 9:00 AM to 9:30 PM. That includes weekends, and it means you can call today and have a job on the schedule without waiting.
Know the price. Know the scope. Know what happens next.
It depends on the job. Work at the panel, on branch circuits, or anywhere the wiring is live requires the relevant circuits or the main service to be de-energized before we touch anything. Outlet and switch replacements typically involve shutting off the breaker for that circuit. We handle the lockout and confirm the circuit is safe before starting. You do not need to do anything to the panel ahead of the visit.
Clear a path to the breaker panel and move anything blocking the outlets, switches, or fixtures that need attention. For attic, crawl space, or wall access, let us know on the call if there are obstacles so we can plan the visit accordingly. The more accessible the work area, the faster the job goes.
We start with the symptom or the request and work outward from there. For a repair, that means tracing the fault from the outlet or fixture back through the circuit to the panel. For an installation, it means understanding what the new load requires and whether the panel has capacity to support it. The scope is confirmed before any work begins, and nothing is added without your knowledge.
We test every outlet, switch, fixture, or circuit that was part of the job before we leave. For panel work, that includes confirming each breaker is seated correctly and the load is distributed as expected. For GFCI and AFCI outlets, we test the trip function. We walk you through what was done and what was tested so you know the work is complete.
A quick repair is the right call when the fault is isolated and the rest of the wiring is in good shape. When a repair reveals wiring that is deteriorated, improperly modified, or out of compliance with current code, patching the symptom without addressing the underlying condition is a short-term fix. We tell you what we find and let you decide how to proceed, with a clear explanation of what the fuller fix involves and what it costs.
Flickering lights can point to a loose connection at the fixture, the switch, or the outlet feeding it. They can also indicate a problem at the panel, a failing breaker, or a circuit that is overloaded. Dimming that happens when a large appliance starts up is often a sign the circuit or the service is undersized for the load. We diagnose from the symptom back to the source rather than replacing parts until something works.
Frequent breaker trips, a fuse box still in service, a 100-amp panel feeding a home with multiple large appliances, an EV charger or generator hookup that the current panel cannot support, and breakers that feel warm or show discoloration are all signs worth a conversation. A panel that was adequate when it was installed may not be sized for what the home draws today, especially in Palm Bay where year-round air conditioning puts a steady load on the service.
We check breaker condition and seating, look for signs of overheating or corrosion at connections, confirm the panel is properly grounded, verify the grounding electrode connection, and assess whether the service amperage is adequate for the home's current load. For older panels, we note the panel brand and age, since some older equipment has known reliability issues. The findings are explained before any work is recommended.
A whole-home surge protector is installed at the panel and intercepts voltage spikes before they reach the branch circuits. When a lightning strike or utility event sends a surge through the line, the device clamps the voltage and diverts the excess. It protects appliances, electronics, and the wiring throughout the house. It works alongside point-of-use protection at individual outlets rather than replacing it.
A generator hookup centers on the transfer switch, which connects the generator to the home's panel and isolates the home from the utility line when the generator is running. That isolation is what makes the installation safe for the household and for utility workers on the line. We handle the transfer switch installation, the circuit from the panel to the generator connection point, and any panel capacity work needed to support the load. We scope the full job on the call before anything is scheduled.
Pool and spa wiring requires a dedicated circuit for the pump, underwater lighting wired to low-voltage or GFCI-protected circuits, and bonding of all metal components in and around the water to equalize voltage. The bonding requirement is a code matter, not a preference, and it is what prevents voltage differences in the water from becoming a hazard. We cover all of it as part of a pool wiring visit and walk you through what was installed before we leave.
We identify what is out of compliance, explain what current code requires, and give you a price for the correction before any work starts. Common corrections in older Palm Bay homes include adding GFCI protection to kitchen and bathroom circuits, remediating aluminum branch-circuit wiring at connections and devices, and replacing panels or breakers that no longer meet current standards. The correction is documented so you have a record of what was brought up to code.
Yes. Where running a new grounding conductor back to the panel is not practical, code permits the installation of GFCI outlets as a replacement for ungrounded outlets, with proper labeling. We assess the wiring at each location and recommend the approach that brings the outlet into compliance with the least disruption to the walls and existing wiring. The options and their trade-offs are explained before anything is installed.
Palm Bay Electrical Company handles repairs, panel upgrades, wiring, lighting, ceiling fans, outlets, dedicated circuits, EV charger installation, generator hookups, surge protection, pool wiring, and electrical inspections for homes and businesses across Palm Bay and Brevard County. We are available every day from 9:00 AM to 9:30 PM.
Call (321) 499-1593 for a quote.
We scope the job on the call, confirm the price before we schedule, and show up ready to work.
We power your home. We protect your circuits. We earn the call.
Below is a plain look at the electrical work we handle for homes and businesses across Palm Bay and Brevard County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job you need is not listed or you are not sure which service applies, call us and we will scope it on the phone.
| Type of Work | What's Included | Best For | Worth Knowing |
|---|---|---|---|
| Ceiling Fan Installation | New fan installation, Fan and light kit wiring, Switch and remote setup, Box and brace replacement | Rooms without an existing ceiling box rated for a fan | A standard light box is not rated to support a ceiling fan. We confirm the box and brace are correct before the fan goes up. |
| Lighting Installation | Recessed and LED lighting, Exterior and security lighting, Motion sensor lights, Weatherproofed outdoor fixtures | Homeowners upgrading interior lighting or adding exterior security and landscape lighting | Outdoor fixtures in coastal Brevard County need proper weatherproofing and GFCI protection. We wire them to handle the humidity and salt air. |
| Outdoor and Dock Circuits | Exterior outlet and circuit installation, GFCI-protected outdoor wiring, Weatherproofed connections, Dedicated circuits for outdoor equipment | Homeowners adding outdoor kitchens, dock power, or exterior workshop circuits | All outdoor circuits in Florida require GFCI protection and weatherproof covers rated for the exposure level at the installation point. |
| Wiring and Circuit Installation | Whole-home rewiring, Knob-and-tube replacement, Aluminum wiring remediation, New circuit runs | Older homes with deteriorated, ungrounded, or improperly modified wiring | Aluminum branch-circuit wiring requires specific remediation at connections and devices. Replacing devices alone is not enough. |
| Pool and Spa Wiring | Dedicated pump circuit, Bonding of metal components, Outdoor GFCI protection, Low-voltage underwater lighting circuits | Palm Bay homeowners installing or upgrading a backyard pool or spa | Bonding all metal components in and around the water is a code requirement, not an option. It equalizes voltage and prevents hazards in the water. |
| Electrical Panel and Service Upgrades | Panel replacement and resizing, Service entrance upgrades, Load calculation, Subpanel installation | Homes adding an EV charger, generator, or large appliance that the current panel cannot support | Panel upgrades in Palm Bay often coincide with generator or EV charger installs. We handle the full scope in one visit where possible. |
| Electrical Repairs and Troubleshooting | Fault diagnosis from symptom to source, Outlet and switch testing, Breaker and wiring checks, GFCI and AFCI device testing | Homeowners dealing with dead outlets, tripping breakers, or burning smells | A burning smell or sparking outlet is not a wait-and-see situation. We scope the job on the phone before anything is scheduled. |
| Whole-Home Generator Installation | Transfer switch installation, Generator circuit hookup, Panel capacity assessment, Portable and standby unit hookups | Palm Bay households preparing for hurricane season or anyone relying on medical equipment or refrigerated medication | A transfer switch isolates the home from the utility line when the generator runs. That isolation protects both the household and utility workers outside. |
| Outlet and Switch Installation | GFCI and AFCI outlet installation, Ungrounded outlet remediation, Dimmer switch installation, Outlet relocation | Kitchens, bathrooms, garages, and outdoor areas needing code-compliant protection | Kitchens, bathrooms, and outdoor areas all require GFCI protection under current code. Older homes in Palm Bay frequently need this added. |
| Surge and Lightning Protection | Whole-home surge protector installation, Panel-level voltage spike interception, Protection for appliances and electronics, Coordination with point-of-use devices | Any Palm Bay home, given Florida's year-round lightning activity | Florida leads the country in lightning strikes. A panel-level surge protector is one of the most cost-effective upgrades available here. |
| Breaker and Fuse Repair | Breaker replacement, Fuse box assessment, Overload diagnosis, Connection inspection | Homes with a breaker that trips repeatedly or a fuse box still in service | A breaker that trips under normal load may be failing or may be telling you the circuit is undersized. We identify which before recommending a fix. |
| Dedicated Appliance Circuits | Dryer and oven circuit runs, Refrigerator and dishwasher circuits, EV charger circuit and outlet, Panel capacity check | Homeowners adding a large appliance or Level 2 EV charger | A Level 2 EV charger requires a 240-volt dedicated circuit. We confirm panel capacity and run the circuit as part of the same job. |
| Corrosion-Resistant Coastal Fixtures | Salt-air rated fixture installation, Weatherproofed exterior wiring, Coastal-grade outlet and cover installation, Fixture and connection inspection | Palm Bay and coastal Brevard County homes where salt air accelerates corrosion on standard fixtures | Standard exterior fixtures corrode faster near the coast. We select and install fixtures rated for the salt-air exposure level at your property. |
| Electrical Safety Inspections | Panel and wiring condition review, GFCI and AFCI coverage check, Grounding and bonding assessment, Written findings summary | Home buyers, sellers, landlords, and owners of older Palm Bay properties | A pre-purchase inspection can surface panel issues, missing GFCI protection, or DIY wiring before they appear in a buyer's report. |
How do I know if my home is ready for the electrical load I want to add?
The answer starts with what the panel is currently running and what the new load requires. We do a load calculation on the call when you describe the appliance or equipment you are adding. If the panel has capacity, we run the circuit. If it does not, we talk about what an upgrade involves before anything is scheduled.
What causes warm or buzzing outlets, and is it serious?
A warm outlet can mean a loose connection, an overloaded circuit, or a failing device. A buzzing sound often points to a loose wire or a failing breaker on that circuit. Neither is a situation to leave alone. We diagnose from the outlet back through the circuit to find the source before recommending a fix.
Do I need to be home when the electrical work is done?
For most jobs, yes. We need access to the panel, the work areas, and the outlets or fixtures involved. For rental properties, a landlord or property manager can be present in place of the tenant. We confirm access requirements on the call when the job is scoped.
Faults Traced Before Anything Is Replaced
We work from the symptom back to the source. That means identifying what actually failed before recommending parts or labor, which keeps the scope accurate and the cost honest.
How does pricing work and when do I get a number?
You get a price on the call, before anything is scheduled. We scope the job based on what you describe, confirm the price, and explain what it covers. If the work turns out to involve something we could not see from the description, we tell you before we proceed, not after.
What are the concerns with aluminum branch-circuit wiring in older homes?
Aluminum wiring expands and contracts more than copper, which loosens connections over time at outlets, switches, and fixtures. Loose connections generate heat, and heat at a connection is a fire risk. The correct fix is remediation at every connection point using listed connectors or devices rated for aluminum. We assess the wiring type during a visit and explain what remediation involves for your home.
What does knob-and-tube wiring mean for a home, and when does it need to be replaced?
Knob-and-tube is an older wiring method with no ground conductor and insulation that deteriorates over time. It was not designed for the loads modern homes carry. Insurance carriers in Florida increasingly refuse to cover homes with active knob-and-tube wiring. We assess the condition and extent of the wiring during an inspection and walk you through what a rewire involves.
Code-Compliant Work on Every Job
Every outlet, circuit, panel, and fixture we install meets current code for Brevard County. We document what was done so you have a clear record of what was brought up to standard.
What is involved in wiring a home for an EV charger?
A Level 2 charger runs on a 240-volt dedicated circuit, typically a 50-amp circuit for most home chargers. We confirm the panel has capacity for the added load, run the circuit from the panel to the garage or parking area, and install the outlet or hardwired connection. If the panel needs an upgrade first, we handle that as part of the same project.
How do I know if my older Palm Bay home needs a full rewire or just targeted repairs?
It depends on the wiring type, its condition, and how much of the home is affected. Homes with knob-and-tube or deteriorated cloth-insulated wiring often need more than a spot fix. Homes with aluminum branch circuits may need remediation at every device rather than full replacement. We assess what is there and give you a clear picture of the options before recommending a scope.
Older and Newer Wiring Both Handled
From knob-and-tube and aluminum branch circuits in older Palm Bay homes to new dedicated circuits for EV chargers and generators, we handle the full range of residential wiring conditions.
What does grounding and bonding mean, and why does it matter in an older home?
Grounding gives fault current a safe path back to the panel and then to the utility, which trips the breaker and stops the hazard. Bonding connects metal components together so they stay at the same voltage. Older homes often lack proper grounding at outlets and may have bonding gaps at panels and plumbing connections. We check both during an inspection and explain what we find.
How long does a panel upgrade typically take?
Most panel replacements are a full-day job, sometimes extending into a second day if the service entrance or meter work is involved. The utility company may need to disconnect and reconnect power at the meter, which adds scheduling time. We walk you through the full sequence on the call so you know what to expect before the work starts.
How are emergency electrical faults handled?
If you are dealing with a burning smell, a sparking outlet, or a sudden loss of power that is not a utility outage, call us at (321) 499-1593 during our hours, 9:00 AM to 9:30 PM every day.
We scope the situation on the call and get it on the schedule as quickly as the situation allows. Describe what you are seeing and we will tell you how urgent it is and what the next step looks like.
Call (321) 499-1593 and we will scope the job on the phone, confirm the price before anything is scheduled, and get your electrical work on the calendar.
(321) 499-1593